SUPER FLOWER SF-464T2 - Fury-Tech Forums

madchester2000 · #1 (**permalink**) 03-05-2007, 01:30 PM

Hi all,

God this is doing my head in

I have an SUPER FLOWER SF-464T2 I have bought all new stuff for my new computer so I am using all my old stuff in this SF-464T2 I have connected all the supplies and all the correct cables I am not getting any power to the computer now I have transfered all the old stuff back to my old case and it works fine so I know there is no problem with the power and the hardware..

can anyone point me in the right direction I have had the front pannel off there was a wire for the lights that was loose but they have connected to a power supply and they seam to be working fine

PLEASE PLEASE help

**Tekime** · #2 (**permalink**) 03-05-2007, 08:04 PM

Are you using the same power supply in both cases then? If not swap your old PSU over too.

If you are well, could be the power switch on the new case is messed up? Try connecting the two pins for the power switch with a butter knife, this should short them and start the PC if the power switch is just messed up. Otherwise maybe a grounding problem? Are all the motherboard risers in place?

madchester2000 · #3 (**permalink**) 03-06-2007, 12:18 PM

I have found out what is shorting the PC the bronze screw insert on the case there was 1touching the motherboard and no screw hole so it was shorting the case

Thanks matey

Rick

**Tekime** · #4 (**permalink**) 03-06-2007, 09:32 PM

Hey Rick, glad you got it figured out.